Specifications
SG $268.68
Inc. GST
The Motic LED Module (Low color temperature, 3500ºK) is designed as a replacement or accessory lighting module for compatible Motic optical instruments and microscope systems. With a low colour temperature of 3500ºK, this LED module supports warm, clear illumination for laboratory, education, and microscopy applications.
This Motic LED module provides a practical lighting solution for users requiring dependable illumination support in compatible microscope setups.
The LED module is designed for microscope and optical instrument illumination. This led module format supports routine laboratory work in that application.
The main specifications of the LED module are that the colour temperature is Low colour temperature, 3500ºK. These are the main selection points to compare with the requirements of the laboratory task.
Yes. The LED module is suitable for microscope and optical instrument illumination. The product is designed specifically for that type of work when its stated format and operating characteristics match the laboratory requirement.
The LED module is compatible with Designed for compatible Motic systems. This is the key compatibility point to match with the intended equipment or workflow.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
SG $268.68
Inc. GST
