Colour
For ext. tubing Ø
Specifications
Compare modelsSG $79.68
Inc. GST
The SCAT PE Fitting, 1.6 mm OD, Green, UNF1/4" is designed for secure tubing connection in laboratory solvent handling and HPLC workflows. Featuring an integrated ferrule, this fitting supports reliable installation and dependable connection performance in compatible SCAT systems.
This SCAT PE fitting is suitable for laboratories requiring a green 1.6 mm OD fitting with integrated ferrule for secure tubing connections.
The UNF1 is designed for laboratory solvent handling and HPLC connection workflows. This pe fitting format supports routine laboratory work in that application.
The main specifications of the UNF1 are that the colour is Green and the outer diameter is 1.6 mm OD. These are the main selection points to compare with the requirements of the laboratory task.
Yes. The UNF1 is suitable for laboratory solvent handling and HPLC connection workflows. One relevant feature is that the design is Fitting with integrated ferrule, which supports use in that type of laboratory workflow. Where chemicals or solvents are involved, confirm that the product material is suitable for the specific substance and conditions before use.
The UNF1 uses UNF1/4". This is the main connection detail to match with the rest of the laboratory setup.
Manufacturer P/N
407061
Part Number
4.715 042
Manufacturer
SCAT
Colour
Green
Manufacturer P/N
407063
Part Number
4.715 044
Manufacturer
SCAT
Colour
Blue
Manufacturer P/N
407059
Part Number
4.715 043
Manufacturer
SCAT
Colour
Purple
The UNF1 is designed for laboratory solvent handling and HPLC connection workflows. This pe fitting format supports routine laboratory work in that application.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
SG $79.68
Inc. GST
