Capillary connections
Hose connections
No. of blind plugs
No. of fittings
No. of olives
Specifications
Compare modelsSG $285.36
Inc. GST
The Bohlender b.safe Disposal Cap S55, 2x UNF 1/4", 1x GL14, 1x PTFE/PP is designed for safe and controlled connection of capillaries and tubing in laboratory liquid waste disposal systems. This screw cap features a freely movable PTFE insert and supports connection options for capillaries with outer diameters of 1.6, 2.2 and 3.2 mm, as well as hose olives for tubing with inner diameters from 5.5 to 8 mm.
Note: A b.safe exhaust air filter can be screwed into the GL14 thread and is not included in the scope of supply.
Scope Of Supply: Fittings, blind fittings UNF 1/4", blind fittings NPT 1/8" and hose olives NPT 1/8".
This Bohlender b.safe disposal cap provides a practical and chemically suitable connection solution for laboratories requiring secure liquid waste handling and controlled solvent disposal.
Hose connectors for Waste Caps
SG $285.36
Inc. GST
Manufacturer P/N
M 355-03
Part Number
4.680 460
Manufacturer
Bohlender
Capillary connections
2
Manufacturer P/N
M 355-01
Part Number
4.681 592
Manufacturer
Bohlender
Capillary connections
3
Manufacturer P/N
M 355-40
Part Number
4.681 595
Manufacturer
Bohlender
Capillary connections
4
It is designed for safe and controlled connection of capillaries and tubing in laboratory liquid waste disposal systems. This screw cap features a freely movable PTFE insert and supports connection options for capillaries with outer diameters of 1.6, 2.2 and 3.2 mm, as well as hose olives for tubing with inner diameters from 5.5 to 8 mm.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
SG $285.36
Inc. GST
