Immersion depth
Specifications
Compare modelsSG $3,255.72
Inc. GST
The Bürkle Removal System for Solvent Outlet, 95 cm, is designed for safe and efficient removal of solvents in laboratory settings. Operating with compressed air or inert gas (e.g., nitrogen) to create overpressure in the container, this system allows hazardous media to be safely dispensed and accurately metered via a secure stopcock. Compatible with UN tanks and barrels (test pressure ≥ 150 kPa), it ensures no escape of solvent vapors, providing a safe and clean working environment. The wetted parts are made of stainless steel and PTFE for excellent chemical resistance and durability. Its 95 cm length offers flexibility, and the system can be transportable or permanently mounted to suit various laboratory setups.
Scope of Supply:
Caution: When working with combustible liquids, the tank, pump, and pressure regulating unit must be earthed. Use an antistatic set additionally for the pump to ensure safety.
The Bürkle Removal System for Solvent Outlet is an indispensable tool for laboratories prioritizing safety and efficiency in solvent management.
Manufacturer P/N
5603-5003
Part Number
4.665 339
Manufacturer
Burkle
Immersion depth
950 mm
Manufacturer P/N
5603-5001
Part Number
4.665 338
Manufacturer
Burkle
Immersion depth
600 mm
It is designed for safe and efficient removal of solvents in laboratory settings. Operating with compressed air or inert gas (e.g., nitrogen) to create overpressure in the container, this system allows hazardous media to be safely dispensed and accurately metered via a secure stopcock. Compatible with UN tanks and barrels (test pressure ≥ 150 kPa), it ensures no escape of solvent vapors, providing a safe and clean working environment. The wetted parts are made of stainless steel and PTFE for excellent chemical resistance and durability. Its 95 cm length offers flexibility, and the system can be transportable or permanently mounted to suit various laboratory setups.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
SG $3,255.72
Inc. GST
